Water Softener with Filtration

Oceans DM series water softener have a dual purpose of both softening and removing harmful impurities from your house water

Best Home Water Treatment Systems

We provide clean, filtered water with zero maintenance.

The Oeanus DM Series Whole House Water Softener
The Oceanus Dual Media water softener will reduce the hardness of the water in your home to less than 1 grain per gallon. It also has a 4-stage water filtration process to remove impurities out of the water.
This system will soften your water and remove the majority of impurities (metals, chlorine, etc) found in common municipal water.
Installation occurs at the water service of the dwelling where water is first brought into the home. This allows for the filtration of the entire home domestic water system.

– Soft water to every fixture in home. It is not recommended to drink softened water beacuase of the minor sodium content, but is perfectly safe to drink.
– Reduction in chlorides.
– “Silky smooth” bathing & showering water. Get that smooth sudsy lather.
– 4-Stage filtration process to remove impurities.
– No more water spots on glassware and shower doors.
– Hard water scale prevention to extend life of the plumbing, water heater and other water using appliances.
– Water hardness reduced to less than 1 grain per gallon (gpg).
– Use up to 50% less soap and cleaning products.
– System automatically regenerates based on your personal water usage, not time, saving you money.
– System includes softener tank which holds the dual media resins and separate brine tank which holds the softener pellets.
– System operates on either sodium chloride or potassium chloride softener pellets.

Dual Media Series Water Softener & Conditioner

DM Softener includes Watts W100 control valve, dual chamber Vortech tank and 18″ x 36″ brink tank. The combination of two technologies in one tank reduces costs, while still having the carbon and resin in separate chambers, ensuring proper contact time and no media migration.Carbon can be replaced without replacing the resin, and the system has a lower pressure drop than twin tank systems. Space saving design features Vortech tank technology for design features Vortech tank technology for higher backwash rates and float valve to prevent brine overflow.
There water softeners have no gravel bed reducing cost and weight. Tanks are NSF certified and in USA assembled.



Water Bottles Saved



Impurities Removed


Hard Water Spots



Saved Anually

The Most Recommeded Water System in USA


Overall Ratings


I was searching online for the best water treatment for my home and found Best Water Treatment Systems. After a free analysis and some price comparison I found them to have the best offer for our home. We just love the taste of our water.

Joan M
Brea CA

Everyone comments on how great tasting our water is. We have saved thousands of $’s by not buying bottled water.

John A
Temecula CA

Going on 5 years now and not a single issue with our water. No spots on our glass and fresh tasting water.

Diana A
Laguna CA

Recent Articles

Should You Get a Reverse Osmosis Purifier or a Water Softener?

The water treatment industry is big, worth $27.51 billion USD in 2020, and growing because people are concerned about their water quality and want to choose water to quench their thirst. Many people want to have better tasting, healthier water. If you are among them, you have choices to make, such as whether you should […]

Drinking More Water in the New Year with a Whole Home Water Treatment System

With the new year, you should consider what you drink when thinking about healthy lifestyle changes. Dehydration can make you feel tired and cranky. Drinking more water instead of caffeinated drinks or sugary sodas can help you to feel more hydrated and healthier. Check out these tips for drinking more quality water throughout your daily […]

Hard Waters and How to Correct

Most homeowners don’t think too much about their water beyond the taste. However, 85% of Americans, including those in Southern California, have hard water. This type of water chemistry can impact more than the taste of water. In fact, your home’s water hardness could reduce the efficiency of water heaters, cut water pressure from showerheads, […]

Frequently Asked Questions

What is Hard Water?

Water naturally evaporates from oceans, lakes, and rivers to form clouds. Pure water then falls to the earth as rain, snow, and sleet cleaning the air, and picking up contaminants on the way down. This water, which falls back to the earth, becomes more aggressive. As moisture hits the earth and filters through layers of rock and dirt, it picks up minerals like calcium and magnesium which concentrate the hardness of the water.

Hardness can cause a variety of aesthetic challenges for homeowners. Hard water creates a mineral buildup on water-using appliances such as water heaters, dishwashers, and laundry machines. This mineral scale decreases efficiency and causes premature ware on the appliances. In addition, because hard water contains contaminants that interfere with cleaning, homeowners find themselves using more soap and products to clean. To avoid these problems, homeowners often invest in a water softening unit to remove the hardness from the water.

Hard water: how “hard” is hard?

Basically water hardness is measured by the amount of hardness minerals (generally calcium and magnesium) in your water. These amounts are measured in grains per gallon (GPG). The following table illustrates the hardness magnitude of water:

Hardness MagnitudeGrains Per Gallon (GPG)
Soft Water0.0 – 1.0 gpg
Moderately Hard Water1.0 – 3.5 gpg
Hard Water3.5 – 7.0 gpg
Very Hard Water7.0 – 10.5 gpg
Extremely Hard Water> 10.5 gpg

Often people say, “I’ve heard of places that are 30 grains hard, or even 60 grains hard. This scale cannot possibly be all encompassing!” The United States has some areas that exceed 100 gpg in hardness, but this scale is based on appliance tolerance to hard water. Take your dishwasher for example: The softer the water, the longer it will last. Under moderately hard water, your dishwasher will last several years–even though it’s not entirely soft water. On the other hand, if you’re on extremely hard water, your dishwasher may only last a few years before hard water completely incapacitates the appliance. Certainly the dishwasher will run on 50 gpg hardness, but its lifespan will be dramatically shortened.

Why do I feel ‘slick’ or ‘slimy’ in the shower with soft water?

If you’re not used to soft water, it is not uncommon to leap into a shower and lather up as usual only to feel slick and slimy later. Soft water is exponentially more effective than hard water for dissolving substances—including soap. The same soap is now 50-75% more effective in the soft water. So when you’re used to using a certain amount of soap in a hard water shower and then use the same amount in a soft water shower, you’ll be swimming in suds and find them difficult to wash off. This feeling can be greatly reduced by simply using less soap. Soft water also allows the natural oils of your skin to be retained. Hard water can strip away these oils which can cause the “squeaky” feeling.

Is soft water safe to drink? What is the sodium content in soft water?

Soft water is safe to drink for virtually everyone. If you participate in a very strict sodium-restricting diet, salt-softened water may not be right for you. To give you an idea how the additional salt affects your sodium intake, consider this: an average soft-water consumer takes in about five grams of sodium through normal eating and drinking. Of those five grams of sodium, one-third of one gram (0.336 g) is from softened water the equivalent weight of half a watermelon seed. A black olive contains 238 times the amount of sodium you’ll consume in an entire day from soft water! That’s how little sodium is added to your diet through soft water.

How much soap should I use with soft water?

Soft water cleans much more effectively than hard water. To accomplish the same results, soft water requires 50-75 percent less soap or detergent than hard water. This alone creates a great cost savings over time. When you first start using soft water take special care to quarter the amount of soap you typically use. For a lightly soiled load of laundry in a laundry machine, a heaped teaspoon of powdered detergent should be sufficient. You don’t need to fill your dishwasher detergent bin to heaping–in fact only fill it a quarter of what you used to. While the 1/4 rule is generally sound, experience is the best teacher in this area.

Does soft water cure dry skin?

First soft water is not a cure-all for dry skin and eczema. That said, dry or itchy skin is often caused by foreign substances on the skin, substances that can be greatly reduced if not eliminated with soft water. Many sufferers of dry skin or eczema report improvement after using soft water. Because so many factors influence the skin, it’s impossible to quantify the effects of soft water on the skin.

However, many benefits are unchallenged: soft water requires less soap or detergent and rinses cleaner than hard water, soap curds and other chemicals are rinsed away leaving pores naturally open–allowing the skin to “breathe.” With clearer skin, and less products to irritate the skin, dry skin sufferers and eczema patients generally experience softer, healthier skin with continued use of soft water.

I’m moving, can I take my water softener with me?

Yes you can. While many plumbing fixtures become part of the home, many people choose to take their water softening system with them when they move. Basically you’ll have to place the system in bypass (which allows hard water to flow through the valve independent of the softener), then disconnect the system.

You are also the original purchaser so your warranty will still be in force. Alternatively, some people elect to leave the softening system in the home and sell it with the home and purchase a new one when they arrive at their new home.

Do I have to use salt in my water softener?

Yes, soft water systems require the regular addition of a salt to the brine system. Consumers have the choice of using one of two commonly available salts—Sodium Chloride or Potassium Chloride. The salt is dissolved to make the brine that the system uses to regenerate/clean itself so that it can continue to create soft water. Without the brine solution, a softener would not be able to regenerate and would eventually exhaust its ability to make soft water.

How much salt is used in each regeneration cycle?

SoftenerRegeneration Salt Usage (lbs)
DR-7011.5 LBS
DR-9012.50 LBS

How hard is the water in my area?

Hardness varies across the United States. This map should provide at least a general idea of hardness hot spots in the U.S. according to the United States Geological Survey (USGS).

Can I water my plants with soft water?

Remember that both hard and soft water have minerals that will ultimately be deposited in the soil. Most plants don’t take to soft water, as sodium is more difficult for a plant to deal with than magnesium and calcium (the hardness ions). Rain, distilled, or deionized water is the healthiest for plants because they generally do not contain elements that are difficult for plants to use.

We recommend leaving your outside hose bibbs tapped to the hard water line as watering your garden with soft water is both wasteful and more difficult for plant survival. On the other hand, other applications such as car washing persuade some consumers to turn one hose bibb soft and leave the other hard.

Can I use copper tubing for my RO?

Due to the aggressive nature of pure or purified water, manufacturers recommend that all tubing as-sociated with high-purity water, including reverse osmosis systems, should not be metal. When water flows down a stream it gradually gathers particles from what it is passing over. In rocks, this creates erosion.

Pure or purified water is very aggressive in that it is able to quickly absorb particles from its surroundings. If reverse osmosis water was allowed to contact metal tubing (like copper) it would slowly pull parts of the copper into the water creating a water leak in the pipe. Plastic tubing is used for reverse osmosis systems to prevent this from occurring, because the purified water is not able to breakdown the plastic.

If the power goes out, will it hurt the softener?

No, power outages will not damage the softener in any way. The valve head has an 8 hour memory backup to remember your water usage patterns even if the power goes out. The clock is digital and will be affected by power outages lasting longer than one hour, so you will need to reset the time on the controller. All other settings will remain as unchanged.

I don’t have room inside, can I install it outside?

Yes you can install a softener outdoors in certain conditions. Be aware that while the brine will not freeze, the water inside your softener tank can. When the water freezes it expands and can crack resin beads, the softener tank or piping all of which can potentially destroy the unit. Some customers elect to keep the unit inside and then run piping from the unit to the brine tank outside. This can conserve some space inside while still ensuring your unit will not freeze.

If you live in a climate that does not reach freezing temperatures, the entire unit can remain outside safely. In order to prevent cosmetic sun damage, it is recommended you keep the unit out of direct sunlight. A simple enclosure generally remedies this problem.

Book an Appointment or Learn More